![Compressed air motor drives wheelchair](https://ptm-mechatronics.com/wp-content/uploads/2018/01/Bildschirmfoto-2018-02-12-um-16.20.42-993x675.png)
![Compressed air motor drives wheelchair](https://ptm-mechatronics.com/wp-content/uploads/2018/01/Bildschirmfoto-2018-02-12-um-16.20.42-993x675.png)
![Mixing and filling systems for laboratories](https://ptm-mechatronics.com/wp-content/uploads/2022/03/Stativruehrwerk-mit-Absaugung-und-Kompressor-weiss-1.jpg)
Mixing and filling systems for laboratories
Mixing and filling systems for laboratories In laboratories, certain solutions and tinctures are needed again and again for different applications. They form a kind of basis for further mixtures for research and test purposes. These solutions and tinctures must be...![2-component stirring and dosing system – accurate to the gram](https://ptm-mechatronics.com/wp-content/uploads/2021/12/Uebersicht-Anlage-1-1080x675.jpg)
2-component stirring and dosing system – accurate to the gram
2-component systems mix two components that immediately react when they come into contact with one another. A practical example of a 2-component application is the two-component adhesive. Here two tubes separate the two components. When you press the slide, they come...![Construction of a complete 2-component supply system](https://ptm-mechatronics.com/wp-content/uploads/2021/09/Fassruehrwerk-mit-Pumpe-und-Drehzahlanzeige-ohne-Schlauch-1.jpg)
Construction of a complete 2-component supply system
In our plant constuction department, we design and build complete systems for stirring technology. In this case study we developed a 2-component supply system. What is a 2-component supply system? A 2-component supply system supplies the downstream process with two...![Cut rubber like butter with the compressed air motor from PTM mechatronics](https://ptm-mechatronics.com/wp-content/uploads/2020/12/Gummischneidemaschine-mit-PTM-Druckluftmotor-1.jpg)
Cut rubber like butter with the compressed air motor from PTM mechatronics
Our customer cuts rubber mats with a thickness of up to 30mm with a rubber cutting machine. He was not satisfied with his previous solution: too loud, too weak, too heavy and the high compressed air consumption cost money. A new solution was needed. Our joint project...![Fresh and fruity – gentle fruit processing with flexible PTM agitator](https://ptm-mechatronics.com/wp-content/uploads/2020/12/PTM-Containerruehrwerk-mit-aufsteckbarer-Edelstahltraverse-im-Einsatz-1.jpg)